For those who have a site or perhaps an app, speed is vital. The quicker your site functions and then the quicker your applications operate, the better for you. Since a web site is simply an array of data files that connect with each other, the devices that keep and work with these data files have a huge role in site general performance.

Hard disk drives, or HDDs, have been, until the past few years, the most trustworthy systems for storing data. Then again, in recent years solid–state drives, or SSDs, are actually becoming popular. Look into our evaluation chart to see if HDDs or SSDs are better for you.

1. Access Time

Image

After the launch of SSD drives, file accessibility speeds are now tremendous. On account of the new electronic interfaces utilized in SSD drives, the typical data access time has been reduced into a all–time low of 0.1millisecond.

Image

HDD drives count on rotating disks for data storage reasons. Every time a file will be used, you will need to wait around for the right disk to get to the correct place for the laser to access the file you want. This leads to a common access rate of 5 to 8 milliseconds.

2. Random I/O Performance

Image

The random I/O performance is crucial for the effectiveness of a data file storage device. We’ve carried out in depth trials and have established an SSD can handle a minimum of 6000 IO’s per second.

Image

All through the very same tests, the HDD drives proved to be much slower, with only 400 IO operations addressed per second. While this may seem like a good deal, if you have a hectic web server that hosts many well known sites, a sluggish hard drive may lead to slow–loading web sites.

3. Reliability

Image

SSD drives lack any rotating elements, which means that there is significantly less machinery inside them. And the less physically moving parts there are, the fewer the possibilities of failure can be.

The typical rate of failure of any SSD drive is 0.5%.

Image

HDD drives implement rotating hard disks for keeping and browsing data – a concept going back to the 1950s. With hard disks magnetically suspended in the air, spinning at 7200 rpm, the prospect of one thing failing are much higher.

The regular rate of failing of HDD drives can vary amongst 2% and 5%.

4. Energy Conservation

Image

SSD drives are much smaller compared to HDD drives and they don’t possess just about any moving parts at all. Consequently they don’t create just as much heat and require less power to function and less power for cooling down purposes.

SSDs use up between 2 and 5 watts.

Image

HDD drives are famous for being noisy. They demand further power for chilling reasons. With a web server containing a range of HDDs running all the time, you will need a great deal of fans to keep them cool – this will make them a lot less energy–effective than SSD drives.

HDDs use up in between 6 and 15 watts.

5. CPU Power

Image

As a result of SSD drives’ greater I/O performance, the key server CPU will be able to process data file demands faster and preserve time for different operations.

The average I/O delay for SSD drives is exactly 1%.

Image

HDD drives support sluggish accessibility speeds in comparison with SSDs do, resulting in the CPU required to hang on, while reserving resources for your HDD to discover and give back the required data file.

The standard I/O delay for HDD drives is about 7%.

6.Input/Output Request Times

Image

The majority of My Web Bird’s new web servers moved to just SSD drives. Our own lab tests have shown that by using an SSD, the typical service time for any I/O request whilst operating a backup stays below 20 ms.

Image

During the very same trials with the same hosting server, now suited out using HDDs, efficiency was substantially reduced. During the hosting server data backup procedure, the regular service time for I/O calls ranged somewhere between 400 and 500 ms.

7. Backup Rates

Image

Talking about back–ups and SSDs – we have detected a fantastic advancement with the back up rate since we transferred to SSDs. Now, a usual server data backup will take merely 6 hours.

Image

In the past, we’ve made use of predominantly HDD drives on our web servers and we’re well aware of their functionality. On a web server loaded with HDD drives, a complete server back up will take about 20 to 24 hours.

Our Linux website hosting accounts have SSD drives automatically. Be part of our My Web Bird family, and see the way we could help you enhance your site.


  • Service guarantees

  •  
  • All of our Virtual Private Servers include no setup fees and work in a secure network providing 99.9% of uptime. Full root access to the server warranted.
  • Compare our prices

  •  
  • Take a look at our prices and select the ideal Virtual Private Server for your dynamic sites. You’re able to upgrade to a more powerful VPS plan with just a mouse click.
  • Compare our hosting plans
  • Contact Us

  •  
  • Contact us 24x7x365 by email or by employing the extremely–fast ticketing platform. Our techs are going to respond to any queries within just 1 hour.